Brother DCP-8040 - Windows NT WS 4.0); (For Windows 98;98 Se;Me;2000 Professional and; Using the Brother Control Center (for Windows 98;98 Se;Me;2000 Professional and Windows NT WS 4.0); Brother MFL-Pro Control Center

USING THE BROTHER CONTROL CENTER (FOR WINDOWS
®
98/98SE/ME/2000 PROFESSIONAL AND WINDOWS NT
®
WS 4.0) 9 - 1
9
Brother MFL-Pro Control Center
The Brother Control Center is a software utility that pops up on the
PC screen whenever paper is put in the ADF of the DCP. This allows
you to quickly and with very few mouse clicks, to access the most
frequently used scanning applications. Using the Control Center
stops the need to manually startup any specific applications.
The Brother Control Center provides two operations (Scan and
Copy):
■
Scan directly to a file, E-mail, word processor or graphic
application of your choice
■
Copy
Using the Brother Control
Center
(For Windows
®
98/98SE/Me/2000 Professional
and Windows NT
®
WS 4.0)
If you are using Windows
®
2000 Professional or Windows
®
4.0,
we recommend that you are logged on with administrator rights.