Network Scanning
202
11
Using the Scan key 11
Note
• If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L) edge or 2sided (S)edge depending on your document layout.
• Choose your document layout from following table:
Document Layout Table
• Duplex scan is not supported by the DCP-8070D, MFC-8370DN and MFC-8480DN.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.
• The XPS file format is available for Windows Vista
®
or when using applications which support XML Paper
Specification files.
Scan to E-mail (PC) 11
When you choose Scan to E-mail (Macintosh), your document will be scanned and sent directly to the
Macintosh you designated on your network. ControlCenter2 will activate the default E-mail application on the
designated Macintosh for addressing to the recipient. You can scan a black and white or colour document
and it will be sent with the E-mail from the Macintosh as an attachment.
You can change the scan configuration. (See E-mail on page 187.)
a Load your document.
b Press (Scan).
c Press a or b to choose Scan to PC.
Press OK.
Portrait Landscape LCD Message
Front Back Front Back
(L)edge
(Long edge)
Front Back Front Back
(S)edge
(Short edge)