134
Security features
Configure certificate using Web Based Management 8
This feature can be configured using Web Based Management only. Follow these steps to access the
configure certificate page using Web Based Management.
a Start your web browser.
b Type “http://machine’s IP address/” into your browser (where “machine’s IP address” is the machine’s IP
address).
For example:
http://192.168.1.2/
c Click Network.
d No password is required by default. Enter a password if you have set one and press .
e Click Security.
f Click Certificate.
g You can configure the certificate settings from the screen below.
• The functions that are grayed and unlinked indicate they are not available.
• For more information on configuration, see the Help text in the Web Based Management.
To Next Page
Loading...
