Brother DCP-8110DN

71
Control panel setup
4
MFC-8710DW and MFC-8910DW 4
The factory settings are shown in Bold with an asterisk.
Note
(For MFC-8710DW)
• LDAP, Internet Fax, Fax to Server and Scan to E-mail Server functions are available as a download.
• In order to use this function, please download the necessary firmware from the “Downloads” page for your
model on the Brother Solutions Center at http://solutions.brother.com/
.
Main menu Submenu Menu selections Options
7.Network
1.Wired LAN 1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP
or DHCP, you will be asked to enter
how many times the machine tries
to obtain the IP address.)
2.IP Address
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
4.Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config Auto*
Static