Brother DCP-J1050DW

Home > Fax > Send a Fax > Check and Cancel a Pending Fax
Check and Cancel a Pending Fax
Related Models: MFC-J1010DW
Follow these steps to view or to cancel faxes stored in the machine's memory and waiting to be sent. If there are
no fax jobs in memory, the LCD displays [No Jobs Waiting]. You can cancel a fax job before it is sent.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Remaining Jobs]. Press OK.
3. Do the following for each fax job you want to check or cancel:
a. Press a or b to scroll through the waiting jobs. If needed, select the job you want to cancel and then press
OK.
b. Press c to confirm or press d to exit without cancelling.
4. When finished, press Stop/Exit.
Related Information
• Send a Fax
Related Topics:
• Telephone and Fax Problems
149