Brother DCP-J1050DW

Home > Troubleshooting > Document Jams > Document is Jammed in the Top of the ADF Unit
Document is Jammed in the Top of the ADF Unit
Related Models: MFC-J1010DW
1. Remove any paper from the ADF that is not jammed.
2. Open the ADF cover.
3. Remove the jammed document by pulling it upwards.
4. Close the ADF cover.
5. Press Stop/Exit or
.
IMPORTANT
To avoid future document jams, close the ADF cover correctly by pressing it down in the centre.
Related Information
• Document Jams
342