Home > Introduction to Your Machine > Set the Ready Screen
Set the Ready Screen
Related Models: DCP-J1140DW
You can change the Ready screen to the [Screen 1], [Screen 2], [Shortcuts 1], [Shortcuts 2] or
[Shortcuts 3] screen.
When the machine is idle or you press , the machine will go back to the screen that you have set.
1. Press [Settings] > [All Settings] > [General Setup] > [Screen Settings] > [Home
Screen].
2. Press a or b to display the [Screen 1], [Screen 2], [Shortcuts 1], [Shortcuts 2] or
[Shortcuts 3] option, and then select the option you want.
3. Press .
The machine will go to your new Home screen.
Related Information
• Introduction to Your Machine
Related Topics:
• Touchscreen LCD Overview
22
To Next Page
Loading...
