Home > Fax > Telephone Services and External Devices > Use BT Call Sign > Enable the Machine to Work
with BT Call Sign (with Your External Telephone only)
Enable the Machine to Work with BT Call Sign (with Your External
Telephone only)
Related Models: MFC-J1010DW
This feature is available only in the U.K.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Miscellaneous]. Press OK.
c. Select [BT Call Sign]. Press OK.
d. Select [On] (or [Off]). Press OK.
3. Press Stop/Exit.
When you turn off BT Call Sign, the receive mode stays in [Manual]. You must set the receive mode again.
Related Information
• Use BT Call Sign
Related Topics:
• Choose the Correct Receive Mode
• Error and Maintenance Messages
178
To Next Page
Loading...
