Brother DCP-J1050DW

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change
for Daylight Saving Time Automatically
Change for Daylight Saving Time Automatically
Related Models: MFC-J1010DW
You can program the machine to change automatically for Daylight Saving Time.
It will reset itself forward one hour in the spring, and backward one hour in the autumn. Make sure you have set
the correct date and time in the [Date & Time] setting.
1. Press Settings.
2. Press a or b to make your selections:
a. Select [Initial Setup]. Press OK.
b. Select [Date & Time]. Press OK.
c. Select [Auto Daylight]. Press OK.
d. Select [On] or [Off]. Press OK.
3. Press Stop/Exit.
Related Information
• General Settings
426