Brother DCP-J1050DW

Level 3 Level 4 Level 5 Descriptions
Web Connect
Settings
Proxy Settings Proxy Connection
Change the Web connection settings.
Address
Port
User Name
Password
Network Reset
- - Restore all network settings back to the
factory settings.
Settings > [Print Reports]
Level 3
Descriptions
XMIT Verify
(MFC-J1010DW)
Print a Transmission Verification Report for your last transmission.
Address Book
(MFC-J1010DW)
Print a list of names and numbers stored in the Address Book.
Fax Journal
(MFC-J1010DW)
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
User Settings
Print a list of your settings.
Network Config
Print a list of your Network settings.
WLAN Report
Print the wireless LAN connection results.
Caller ID History
(MFC-J1010DW)
Print a list of the available Caller ID information about the last 20 received faxes and
telephone calls.
Settings > [Machine Info.]
Level 3
Descriptions
Serial No.
Check your machine's serial number.
Firmware Version
Check your machine's firmware version.
Firmware Update
Update your machine to the latest firmware.
Firmware Auto Check
View firmware information on the Home screen.
Page Counter
Check the total number of pages the machine has
printed.
Settings > [Initial Setup]
Level 3
Level 4 Descriptions
Date & Time Date
(MFC-J1010DW) Add the date and time on the screen and in
the headings of the faxes you send.
(DCP-J1050DW) Set the date and time on your machine.
Time
Auto Daylight
(MFC-J1010DW)
Set the machine to change automatically for Daylight Saving
Time.
Time Zone
Set your time zone.
Station ID
(MFC-J1010DW)
Fax
Enter your name and fax number so it appears on each page
you fax.
Name
Tone/Pulse
(MFC-J1010DW)
- Select the dialling mode.
449