Brother DCP-J925DW - Loading Envelopes and Postcards

Sending a fax (MFC-J825DW only)
13
3
j If you are using the scanner glass, the
LCD will prompt you to choose one of
the following options:
 Press Yes to scan another page.
Go to step k.
 Press No or Mono Start to send the
document.
k Place the next page on the scanner
glass and press Mono Start.
l Repeat steps j and k for each
additional page.
Your machine will automatically send
the fax when it is polled.
Setup for polled transmit with secure
code
3
Secure Polling lets you restrict who can get
the documents you set up to be polled.
Secure Polling only works with Brother fax
machines. If another person wants to retrieve
a fax from your machine, they will have to
enter the secure code.
a Press (FAX).
b Load your document.
c Press d or c to display
Advanced Settings.
d Press Advanced Settings.
e Press a or b to display Polled TX.
f Press Polled TX.
g Press Secure.
h Enter a four-digit number.
Press OK.
i Press d or c to display the settings and
press on the setting you want to change.
Then choose your option. After each
setting is accepted, you can continue to
change more settings.
j Press Mono Start.
k If you are using the scanner glass, the
LCD will prompt you to choose one of
the following options:
 Press Yes to scan another page.
Go to step l.
 Press No or Mono Start to send the
document.
l Place the next page on the scanner
glass and press Mono Start.
m Repeat steps k and l for each
additional page. Your machine will
automatically send the fax.