Brother HE-800A - Installing the Spool Stand; Installing the Eye Guard



HE-800A
4. INSTALLATION
23
㧠
-
㧝㧡
. Installing the spool stand
Assemble the spool stand (1) while referring to the
spool stand instruction manual, and then install the
spool stand (1) at the left side of the work table.
㧠
-
㧝㧢
. Installing the eye guard
CAUTION
Attach all safety devices before using the sewing machine. If the machine is used without these devices
attached, injury may result.
[Vertical positioning]

Install the eye guard (1) with the screw SM4.76-32x6 (2) and the flat washer (3).
[Horizontal positioning]

1. Install the eye guard support (4) to the machine head with the screw (5).
2. Install the eye guard (6) with the screw SM4.76-32x6 (7) and the flat washer (8).

3896Q3895Q
[Horizontal positioning]
[Vertical positioning]
4112M