Brother HL-2060 - CONNECTING YOUR PRINTER TO YOUR COMPUTER USING THE USB INTERFACE; Install the USB driver into your PC

USER’S GUIDE
1–10
Connecting Your Printer to Your Computer using the
USB interface
The Universal Serial Bus is an interface which allows the printer to be
connected to multiple peripheral devices. If your PC has a USB port, you
can connect the printer to your PC by using the USB interface as
described in the following procedure.
✒
Note
• We recommend that you use the USB interface with this printer on
Microsoft Windows

98. Although Microsoft Windows

95 OSR2.1
supports the USB interface, some PCs do not work correctly with the
USB interface.
• Only one Brother printer can be used in the same chain of the USB
connection. If more than one Brother printer exists in the same chain
of the USB connection, only one printer can be used.
• To obtain the latest driver, refer to the following page on our web
site:
http://www.brother.com/english/E-ftp/softwin.html/
Install the USB driver into your PC
1. Turn the printer power off.
Connect your PC and HL-
2060 with the USB
interface cable.
2. Turn the printer
power
on.
The dialog shown on the left
will appear on your PC.
Click the
Next
button.