CHAPTER 1 GENERAL
1–13
4.Click
Details
tab.
5.Select
BRUSB
:(USB Printer Port) in the box for “Print to the
following port”.
6. Click
OK
to close the properties dialog box.
Troubleshooting
If the printer does not print from the USB port, try reinstalling the USB
driver as follows;
1.Double-click the file ‘DeinsUSB.exe’ in the USB directory of CD-
ROM.
2.Turn the printer off and on again.
3.“Add New Hardware Wizard” is launched again, follow the
instruction of the Wizard.
To Next Page
Loading...
