Brother HL-2060 - Install the printer driver into your PC; Set the printer port to USB

USER’S GUIDE
1–12
Install the printer driver into your PC
When the installation of the USB driver is complete, install the printer
driver.
From CD-ROM: Run the CD-ROM program and go to the ‘Install
driver’ menu.
From Floppy disk: Refer to the Software Quick Setup Guide.
Set the printer port to USB
After installing the USB driver and printer driver, the printer port has to
be set to ‘USB port’.
1. Click the
Start
button and select
Printers
in
Settings
.
2. Select HL-2060 icon in printers so that the selected HL-2060 icon is
highlighted.
3. Select
Properties
from
File
menu.