Brother HL-2060 - Page 89

USER’S GUIDE
4–14
Mode Menu (Continued) Setting Menu Sub-Setting Menu Setting
ADVANCED MODE NETWORK MODE LOCK PANEL=OFF ON or OFF
(See 4-46.) PASS NO=### Enter pass number.
AUTO FF=OFF ON or OFF
WAIT TIME= 5s 1 to 99 seconds for AUTO ON
FF SUPPRESS=OFF ON or OFF
TONER LOW=CONT CONT or STOP
exit exit to NETWORK MODE
ERROR PRINT ERROR PRINT=OFF ON or OFF
CONTINUE MODE CONTINUE=MANUAL AUTO or MANUAL
PRINT DENSITY
■■■■■
Increase or decrease the print
density. (15 levels)
INPUT BUFFER
❏❏❏❏❏
Increase or decrease the input
buffer capacity. (15 levels)
SAVE SETTINGS SAVE SETTING 1 Save the current setting as #1
SAVE SETTING 2 Save the current settings as #2
exit exit to ADVANCED MODE
PAGE COUNTER
(See 4-52)
COUNT= 0 Shows the number of printed
pages.
exit MODE Exit MODE
(See 4-52)