Brother HL-2170W - Page 26

Configuring the wireless network settings (For HL-2170W)
19
3
For Ad-hoc mode 3
a Confirm your network environment. See page 20
b You need to configure the wireless network settings by using the Brother installer application.
c Configure your printer for a wireless network. See page 23
Wireless configuration and installing printer driver have been completed.
 Ad-hoc mode
Connected to a wireless capable computer
without an access point
or
 Infrastructure mode See page 18
Connected to a computer with an access point
Using the Brother installer application
Configuring your printer for a wireless network
(For Windows
®
) See page 36
(For Macintosh
®
) See page 59
Installing the printer driver
(For Windows
®
) See page 44
(For Macintosh
®
) See page 66