Wireless configuration for Windows
®
using the Brother installer application (For HL-2170W)
31
4
Configuration using the automatic wireless (one-push)
method 4
IMPORTANT
If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation.
a Make sure that the power cord is plugged in.
b Turn on your printer and wait until the printer is in the Ready state.
c Turn on your computer. (You must be logged on with Administrator rights.)
Close any applications running before configuration.
d Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.
Choose your printer model and the language.
e Click Install Printer Driver on the menu screen.
Note
Choose the Install Printer Driver icon for your region.
To Next Page
Loading...
