Brother HL-2170W - Step by Step Chart

Configuring the wireless network settings (For HL-2170W)
18
3
Step by step chart 3
For Infrastructure mode 3
a Confirm your network environment. See page 20
b Confirm your wireless network setup method. See page 21
c Configure your printer for a wireless network. See page 23
Wireless configuration and installing printer driver have been completed.
 Infrastructure mode
Connected to a computer with an access point
or
 Ad-hoc mode See page 19
Connected to a wireless capable computer
without an access point
Using the Brother
installer application
(Recommended)
Using the one-push
wireless setting mode
Using the PIN Method of
Wi-Fi Protected Setup™
Temporarily using a
network cable
Using automatic
wireless (one-push)
method
Configuring your printer for a wireless network
(For Windows
®
)
See page 24
(For Macintosh
®
)
See page 47
(For Windows
®
)
See page 31
(For Macintosh
®
)
See page 54
See page 69 See page 80
Installing the printer driver
(For Windows
®
) See page 44
(For Macintosh
®
) See page 66
(For Windows
®
)
See page 72
(For Macintosh
®
)
See page 76
(For Windows
®
)
See page 83
(For Macintosh
®
)
See page 87