Brother HL-2170W - Configuration Using the One-Push Wireless Setting Mode; Configuration Using the PIN Method of Wi-Fi Protected Setup

Configuring the wireless network settings (For HL-2170W)
22
3
Configuration using the one-push wireless setting mode 3
If your wireless access point (A) supports either SecureEasySetup™, Wi-Fi Protected Setup™ (PBC
1
) or
AOSS™, you can configure the machine without a computer.
1
Push Button Configuration
Configuration using the PIN Method of Wi-Fi Protected Setup™ 3
If your wireless access point (A) supports Wi-Fi Protected Setup™, you can also configure using the
PIN Method of Wi-Fi Protected Setup™.
 Connection when the wireless access point (router) (A) doubles with a Registrar
1
.
 Connection when another device (C), such as a computer is used as a Registrar
1
.
1
The Registrar is a device that manages the wireless LAN.
A
A
A
C