EasyManua.ls Logo

Brother HL-4040CN - Interface Cable

Brother HL-4040CN
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
About this Printer
2
1
Interface cable 1
The interface cable is not a standard accessory. Buy the appropriate cable for the interface you are going to
use.
USB cable
Do not use a USB interface cable that is longer than 6 feet (2.0 meters).
Do not connect the USB cable to a non-powered hub or a Macintosh
®
keyboard.
Make sure that you connect it to the USB connector of your computer.
Third party USB ports are not supported for Macintosh
®
.
Parallel cable (HL-4050CDN only)
Do not use a parallel interface cable that is longer than 6 feet (2.0 meters).
Use a shielded interface cable that is IEEE 1284-compliant.
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast
Ethernet Network.

Table of Contents

Other manuals for Brother HL-4040CN

Related product manuals