Control Panel
72
4
LCD messages 4
The message on the LCD shows the current printer status during normal operation.
Ready
o o n o
The four o marks (also n, n=blinking o) indicate the Black (K), Yellow (Y), Magenta (M), Cyan (C) toner
cartridges from left to right.
The o marks indicate the status of the toner in the toner cartridges. When the o mark blinks (n), the indicated
toner is nearly empty. When toner becomes empty, the o indicator disappears completely.
When an error has occurred, the type of error is displayed on the first line of the LCD message as shown
below.
The message on the second line shows information for clearing the error.
Cover is open
Close the Front Cover
Printer status messages 4
The following table shows the printer status messages during normal operation:
Printer Status Message Meaning
Cooling Down The printer is cooling down.
Job Cancel Canceling the job.
Ignore Data Printer is ignoring data processed using the PS driver.
Pause The printer has suspended its operations. Press Go to start the printer again.
Please Wait The printer is warming up.
The printer is carrying out the calibration process.
Printing Printing.
Ready Ready to print.
Sleep In Sleep state.
To Next Page
Loading...
