Printing Methods
19
2
c Pull out the MP tray support and unfold the flap (1).
d Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page
as soon as it comes out of the printer.
e Put paper in the MP tray. Make sure that the paper stays under the maximum paper mark (1).
Note
• Do not put more than 3 envelopes in the MP tray.
• Envelope joints that are sealed by the manufacturer should be secure.
• The side to be printed on must be face up.
• All sides of the envelope should be properly folded without wrinkles or creases.
1
1
To Next Page
Loading...
