EasyManua.ls Logo

Brother HL-4040CN - Memory Expansion (SO-DIMM)

Brother HL-4040CN
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Control Panel
83
4
Color Correction
Submenu Menu Selections Options Descriptions
ColorCalibration Calibrate Carry out calibration to revise the
colors.
Reset Set the calibration parameters back
to the default settings.
Auto Regist. Registration Adjusts the print position of each
color automatically.
Frequency Low/Medium*/High/Off Sets the interval time you want to
carry out the auto registration.
Manual Regist. Print Chart Prints the chart to manually check
the registration of the colors.
Set Registration 1 Magenta Left
2 Cyan Left
3 Yellow Left
4 Magenta Center
5 Cyan Center
6 Yellow Center
7 Magenta Right
8 Cyan Right
9 Yellow Right
Enter the correction value on the
chart you printed from the Print
Chart.
The default settings are shown in Bold with an asterisk.
Direct Print
Submenu Menu Selections Options Descriptions
Paper Size Letter/Legal/A4*/
Executive/JIS B5/B5/A5/
B6/A6/A4Long/Folio
Sets the size of paper for direct print.
Media Type Plain Paper*/Thick
Paper/Thicker Paper/
Thin Paper/Recycled
Paper/Bond Paper
Sets the type of paper for direct print.
Multiple Page 1in1*/2in1/4in1/9in1/
16in1/25in1
1in2×2pages1in3×3page
s1in4×4pages1in5×5pag
es
Sets the pattern if you want to print
multiple pages on a single sheet or
one page on multiple sheets.
Orientation Portrait*/Landscape This printer can print pages in portrait
or landscape orientation.
Collate On*/Off
Print Quality Normal*/Fine
The default settings are shown in Bold with an asterisk.

Table of Contents

Other manuals for Brother HL-4040CN

Related product manuals