Configuring your printer for a wireless network (For HL-4070CDW)
31
3
w The following will be displayed.
To apply the wireless settings, select Yes and press OK. Go to x.
To cancel, select No and press OK. Go to k.
Apply Settings?
Yes
x The printer starts to connect the wireless device you have selected.
Connecting WLAN
y If your connection to the wireless network is connected successfully, the display shows Connected for
2 seconds and configuration is completed.
Connected
Note
If the connection fails, the display will shows Connection NG for 2 seconds. See Wireless network
troubleshooting on page 157.
You have completed the wireless setup. To install the printer driver, Go to step a on this page
for Windows
®
or page 33 for Macintosh
®
.
For Windows
®
users 3
a Turn on your computer. (You must be logged on with Administrator rights.)
Close any applications running before configuration.
b Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.
Select your printer and the language.
c Click Install Printer Driver.
Note
Choose the Install Printer Driver icon for your region.
To Next Page
Loading...
