Brother HL-4140CN - T1 Registration Front;Rear Sensor PCB ASSY

3-116
Confidential
9.46 T1 Registration Front/Rear Sensor PCB ASSY
(1) Disconnect the wiring of the T1 registration front/rear sensor PCB ASSY.
(2) Remove the Taptite bind B M3x10 screw to remove the T1 registration front/rear sensor
PCB holder from the PF ASSY.
Fig. 3-156
(3) Release the three Hooks to remove the T1 registration front/rear sensor PCB ASSY from
the T1 registration front/rear sensor PCB holder.
Fig. 3-157
Harness routing: Refer to “ PF ASSY”
Taptite bind B M3x10
PF ASSY
T1 registration front/rear
sensor PCB holder
Hook
T1 registration front/rear
Hook
sensor PCB ASSY
T1 registration front/rear
sensor PCB holder