Brother HL-4140CN - T2 Cover Right

3-135
Confidential
10.5 T2 Cover Right
(1) Remove the two Taptite cup S M3x6 SR screws from the T2 cover right.
Fig. 3-188
(2) Remove the one Pin, and then release the two Hooks at the top.
(3) Release the three Hooks at the bottom to remove the T2 cover right from the T2 frame L
unit.
Fig. 3-189
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
T2 cover right
T2 cover right
Hook
Hook
Pin
T2 frame L unit