Brother HL-4140CN - Worker Switch (WSW) Setting and Printout (Function Code 10, 11)

5-5
Confidential
1.4.3 Worker switch (WSW) setting and printout (Function code 10, 11)
[1] Worker switch setting (Function code 10)
The printer incorporates the following worker switch functions which may be activated with the
procedures using the buttons on the control panel. The worker switches have been set at the
factory in conformity to the codes of each country. Do not disturb them unless necessary.
* For details of the worker switches (WSW), refer to the attached manual.
** DD, MM, and YY refer to the date, month, and year respectively.
WSW No. Function
WSW17 Switching of the time display method (between the American method
(MM/DD/YY**) and European method (DD/MM/YY**))
WSW47 Switching between high-speed USB and full-speed USB
WSW55 Interval of time required for the developing bias voltage correction
WSW56 “Last Job Reprint” function setting
Switching of the display for the coverage of toner cartridge
Switching of the CPU sleep mode
WSW59 Enabling and disabling of transmission of USB serial number (SN)
WSW63 Switching of the time display method (between the Japanese method
(YY/MM/DD**) and other methods)
Demo print type (Demo language)
Font support for Israel
WSW64 Language setting
Default paper size
WSW65 Default media type
Support for Bond paper
Support for Hagaki
Support for Label