Brother HL-4140CN - Page 179

150
General Setup
(Continued)
Tray Setting
(Continued)
Tray Use:Copy — Tray#1 Only
Tray#2 Only
MP Only
MP>T1>T2*
T1>T2>MP
(Tray#2 or T2
appears only if
you installed the
optional paper
tray.)
Chooses the tray that
will be used for Copy
mode.
19
Tray Use:Fax — Tray#1 Only
Tray#2 Only
MP Only
MP>T1>T2
T1>T2>MP*
(Tray#2 or T2
appears only if
you installed the
optional paper
tray.)
Chooses the tray that
will be used for Fax
mode.
19
Tray Use:Print — Tray#1 Only
Tray#2 Only
MP Only
MP>T1>T2*
T1>T2>MP
(Tray#2 or T2
appears only if
you installed the
optional paper
tray.)
Chooses the tray that
will be used for Print
mode.
20
Level 1 Level 2 Level 3 Level 4 Options Descriptions Page
1
See Advanced User's Guide
The factory settings are shown in Bold with an asterisk.