Brother HL-4140CN - Page 191

162
Network
1
(Continued)
WLAN
(Continued)
WLAN Status
(Continued)
Signal — Strong
Medium
Weak
None
You can see the
current wireless
network signal
strength.
SSID — — You can see the
current SSID.
Comm. Mode — Ad-hoc
Infrastructure
You can see the
current
Communication
Mode.
MAC Address — — — Shows the MAC
address of the
machine.
Set to Default ——Yes
No
Restore the
wireless network
settings to factory
default.
WLAN Enable ——On
Off*
Enable or disable
the wireless LAN
manually.
E-mail/IFAX Mail Address — — — Enter the mail
address. (Up to 60
characters)
Setup Server SMTP SMTP Server Name
(Up to 64
characters)
IP Address
[000-255].
[000-255].
[000-255].
[000-255]
Enter the SMTP
server address.
SMTP Port 25*
[00001-65535]
Enter the SMTP
port number.
Auth. for SMTP None*
SMTP-AUTH
POP bef. SMTP
Selects the Security
method for E-mail
notification.
SMTP SSL/TLS None*
SSL
TLS
You can send or
receive an E-mail
via an E-mail server
that requires secure
SSL/TLS
communication.
Verify SMTPCert. On
Off*
Verify the SMTP
Server Certificate
automatically.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions
1
See Network User's Guide
The factory settings are shown in Bold with an asterisk.