14
Setting Up Your Printer
1 Pull the paper tray out until it stops.
Lift up the front of the paper tray slightly and
then remove it completely from the printer.
2 Remove the protective packing.
3 Slide the side paper guides out.
Lift the end paper guide and insert it into the
slot of the paper size you want to load.
4 Load paper in the paper tray.
Make sure that all the paper is under the
tabs.
5 Align the side paper guides with the paper.
6 Put the paper tray back in the printer.
3 Load Paper in the Paper Tray
Paper Tray
Protective Packing
End Paper Guide
Paper Guide
MAX
Up to here
Step 1
To Next Page
Loading...
