Brother HL-4200CN - For Administrators; Setting Your IP Address, Subnet Mask and Gateway (Using the Control Panel)

35
■ For Administrators
Setting the IP Address Acquisition
Method to Control Panel.
1 Press .
2 Press 4 times.
3 Press .
4 Press .
5 Press .
6 Press .
7 Press
8 Press .
3 seconds later, an
asterisk appears.
9 Press .
Setting Your Printer IP Address.
Continued from the previous step.
0 Press .
A Press .
B Using or , set
the desired value (for
example 192).
C Press and move
the cursor to the next
value.
D Repeat Steps B and
C to finish setting
you IP address.
E Press .
3 seconds later, an
asterisk appears.
F Press .
Setting your IP Address, Subnet Mask and
Gateway (Using the Control panel)
Your printer is configured to receive an IP address, Subnet mask and Gateway address from a DHCP
server. If you do not use a DHCP server follow the steps below.
MENU
1:System
Menu
5:Network
5:Network
Ethernet
5:Network
TCP/IP
TCP/IP
Setup IP Address
Setup IP Address
DHCP *
Setup IP Address
Panel
Reboot System
to take effect
Setup IP Address
Panel *
TCP/IP
Setup IP Address
TCP/IP
Setup IP Address
TCP/IP
IP Address
IP Address
000.000.000.000
IP Address
192.000.000.000
IP Address
192.000.000.000
IP Address
192.168.001.100
Reboot System
to take effect
IP Address
192.168.001.100*
TCP/IP
IP Address