Driver and Software
52
2
Media Type
You can change the media type to one of the following:
• Plain Paper
• Thin Paper
• Thick Paper
• Thicker Paper
• Bond Paper
• Envelopes
• Env. Thick
• Env. Thin
• Recycled Paper
• Label
• Glossy Paper
If you are using glossy paper, choose Glossy Paper. Put only one sheet at a time in the MP tray to avoid
a paper jam.
Print Quality
You can choose the following print quality settings.
• Normal (600 x 600 dpi)
600 dpi class. Recommended for ordinary printing. Good print quality with good print speed.
• Fine (2400 dpi class)
2400 dpi class. The finest print mode. Use this mode to print precise images such as photographs.
Since the print data is much larger than in normal mode, processing time, data transfer time, and
printing time will be longer.
The print speed will change depending on what print quality setting you choose. Higher print quality takes
longer to print, while lower print quality takes less time to print.
Color / Mono
You can change the Color/Mono settings as follows:
• Auto
The machine checks the content of your documents for colour. If colour is detected, it prints in colour.
If no colour content is detected, it prints in monochrome. The total printing speed may become slower.
• Color
When your document contains colour and you want to print it in colour, select this mode.
To Next Page
Loading...
