Brother HL-5040 - HP-GL;2

HL-5030/5040/5050/5070N SERVICE MANUAL
4-55
(5) Remove the cup S M3x6 Taptite screw.
(6) Remove the ground spring.
(7) Remove the six bind B M4x12 Taptite screws.
(8) Remove the cup S M3x10 Taptite screw.
(9) Remove the cup S M3x6 Taptite screw, and then remove the sub gear plate.
(10) Remove the LD harness 5P from the drive unit.
(11) Remove the drive unit.
(12) Disconnect the connector for the main motor harness from the main motor ASSY.
Fig. 4-96
Taptite, bind B M4x12
Taptite, bind B M4x12
Taptite, cup S M3x6
Taptite, cup S M3x10
Main motor harness
Taptite, cup S
M3x6
Sub gear plate
Frame L
Drive unit
Main motor ASSY
Ground spring
LD harness 5P