Brother HL-5040 - Page 153

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-56
(13) Remove the four cup S M3x6 Taptite screws, and then remove the main motor ASSY.
Fig. 4-97
(14) Remove the bind B M3x10 Taptite screw.
(15) Remove the P/R solenoid ASSY, the P/R solenoid lever and the solenoid release spring
P/R.
(16) Remove the bind B M3x10 Taptite screw.
(17) Remove the F/R solenoid ASSY and solenoid release spring F/ R.
Fig. 4-98
Taptite, cup S M3x6
Main motor ASSY
Drive unit
F/R solenoid
A
SSY
Solenoid release spring P/R
P/R solenoid ASSY
P/R solenoid lever
Solenoid release
spring F/R
Taptite, bind B M3x10
Taptite, bind B M3x10
Taptite, cup S M3x6