Brother HL-5040 - Page 154

HL-5030/5040/5050/5070N SERVICE MANUAL
4-57
(18) Disconnect the connector from the front cover sensor.
(19) Remove the bind B M3x10 Taptite screw.
(20) Remove the toner LED PCB unit ASSY.
(21) Remove the sensor clip.
(22) Remove the front cover sensor from the main frame R.
Fig. 4-99
Taptite, bind B M3x10
Toner LED PCB
unit ASSY
Sensor clip
Front cover sensor
Sensor clip
Main frame R
Front cover sensor
Connector