5-24
Confidential
1.3.12 Continuous print test (Function code 67)
<Function>
This function is used to conduct paper feed and eject tests while printing patterns.
<Operating Procedure>
(1) Press the [▲] or [▼] in the initial state of maintenance mode to display “MAINTENANCE
67” on the LCD, and press the [OK]. “SELECT: K 100%” is displayed on the LCD.
(2) Refer to the <Print pattern> table, press the [▲] or [▼] to select the print pattern, and
press the [OK]. “SELECT: A4” is displayed on the LCD.
(3) Refer to the <Paper size> table, press the [▲] or [▼] to select the paper size, and press
the [OK]. “SELECT: PLAIN” is displayed on the LCD.
(4) Refer to the <Print specification> table, press the [▲] or [▼] to select the media
specification, and press the [OK]. “SELECT: TRAY1 SX” is displayed on the LCD.
(5) Refer to the <Print type> table, press the [▲] or [▼] to select the print type, and press
the [OK]. “SELECT: 1PAGE” is displayed on the LCD.
(6) Refer to the <Print page> table, press the [▲] or [▼] to select the pages printing, and
press the [OK]. For intermittent pattern printing, “SELECT: 1P/JOB” is displayed on the
LCD. For other printings, move on to the procedure (8).
(7) Refer to the <Number of pages per job> (Only for intermittent pattern printing) table,
press the [▲] or [▼] to select the number of pages for 1 job, and press the [OK].
(Only for intermittent pattern printing)
(8) “PAPER FEED TEST” is displayed on the LCD, and printing test pattern starts using the
selected conditions.
(9) When you press and hold the [Go] for five seconds, test pattern printing is stopped, and
the machine returns to the initial state of maintenance mode.
<Print pattern>
*
For job printing, up to 500 sheets for single-side printing, and 1,000 sheets
for duplex printing.
LCD Description
SELECT:K 100% Black 100% solid printing
SELECT:W 100% White 100% solid printing
SELECT:K1% Black 1% intermittent pattern printing *
SELECT:K5% Black 5% intermittent pattern printing *
SELECT:Lattice Lattice printing
SELECT:Total Print total pattern
To Next Page
Loading...
Need help?
General