11
Windows
®
Wired Network
Windows
®
Macintosh
Wired Network
For Wired Network Interface Cable Users
(For Peer-to-Peer network users)
10
Before you install
a Router
b Machine
a Make sure that your computer is ON and you
are logged on with Administrator rights.
b Remove the protective cap from the Ethernet
port marked with a symbol.
c Connect the network interface cable to the
Ethernet port, and then connect it to a free port
on your hub.
d Make sure your machine’s power switch is on.
11
Install the printer driver
a Put the installation CD-ROM into your
CD-ROM drive. If prompted, select your
language.
b Click Install Printer Driver, and click Yes if
you accept the license agreement.
If you are going to connect the machine to your
network, we recommend that you contact your
system administrator prior to installation.
If there are any programs running, close them.
The screens may differ depending on your
operating system.
If the Brother screen does not appear
automatically, go to Computer (My Computer),
double-click the CD-ROM icon, and then
double-click start.exe.
For Windows Vista
®
and Windows
®
7 users,
when the User Account Control screen
appears, click Allow or Yes.
To Next Page
Loading...
