32
For Network Users
Web Based Management
(web browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
a Open your browser.
b Type “http://machine’s IP address/” into your
browser’s address bar (where “machine’s IP
address” is the IP address of the Brother
machine or the print server name).
For example: http://192.168.1.2/
Reset the network settings to the
factory default
To reset all network settings of the print server to its
factory default, follow the steps below.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose Network Reset.
Press OK.
d Press 1 to choose Reset and then press 1 to
restart the machine.
The machine will restart.
Print the Printer Settings Page
The Printer Settings Page lists all the current printer
settings, including network settings.
a Press Menu.
b Press a or b to choose Machine Info.
Press OK.
c Press OK to choose Print Settings.
The machine will print the current printer
settings.
We recommend Microsoft
®
Internet
Explorer
®
7.0/8.0 or Firefox 3.6 for Windows
®
and Safari 4.0/5.0 for Macintosh. Please also
make sure that JavaScript and Cookies are
always enabled in whichever browser you use. To
use a web browser, you will need to know the IP
Address of the print server. The IP Address of the
print server is listed on the Printer Settings Page.
• If you have configured an optional login
password, you must enter it when prompted to
access the Web Based Management.
• For more information, see Web Based
Management in the Network User’s Guide.
If the IP Address on the Printer Settings Page
shows 0.0.0.0, wait for one minute and try again.