Brother HL-S7000DN - Page 19

19
For Wireless Network Users
Wireless Network
b Manual setup from the control panel using the Setup Wizard (Windows
®
and Macintosh)
If your WLAN access point/router does not support WPS (Wi-Fi Protected Setup™) or AOSS™, write
down the wireless network settings of your WLAN access point/router in the area below.
Please do not contact Brother Customer Service for assistance without the wireless security
information. We cannot assist you in locating your network security settings.
Item Record the current wireless network settings
SSID (Network Name)
Network Key (Security Key/Encryption Key)
* The Network Key may also be described as the Password, Security Key or Encryption Key.
Note
• If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
• How can I find this information (SSID and Network Key)?
1 You should see the documentation provided with your WLAN access point/router.
2 The initial network name could be the manufacturer’s name or the model name.
3 If you do not know the security information, please consult the router manufacturer, your system
administrator, or internet provider.
Now go to
page 22
c One-push setup using WPS (Wi-Fi Protected Setup) or AOSS™ (Windows
®
and Macintosh)
If your WLAN access point/router supports automatic wireless (one-push) setup (WPS or AOSS™)
Now go to
page 24