Brother LX2500 User Manual

140
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ Recalling stored characters.
Recall stored characters.
a
Press (Memory key).
This can be pressed no matter what screen is
being displayed.
X The pocket selection screen is displayed.
b
Select the pocket (1 - 5) where the characters
you wish to recall are stored.
indicates an empty pocket. indicates a
pocket where a character is already stored.
X The selected pocket is shown in reverse
highlighting, and the stored characters are
displayed.
c
After checking the content, press .
Press to check a pattern that is not
displayed completely.
X The stored characters are recalled.
X The screen for inputting characters appears,
and you can embroider the recalled
characters.
Note
z Only characters (not designs) can be stored
in the machine memory.
z Characters saved from an embroidery card
must have the embroidery card inserted in
the machine in order to retrieve the memory
saved from the embroidery card.

Brother LX2500 Specifications

General

Maximum Stitch Width	5 mm
Maximum Stitch Length	4 mm
Free Arm	Yes
Type	Mechanical
Bobbin Type	Top Drop-in
Stitch Functions	Decorative
Dimensions	37.5 x 17.5 x 29 cm