Brother MFC-210C Quick Setup Guide

26
Installing the Driver & Software
3. Carefully route the network cable
through the trench and out the back of
the machine as shown below.
Warning
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
8
Lift the scanner cover to release the lock.
Gently push the scanner cover support
down and close the scanner cover.
9
Turn on the machine by plugging in the
power cord.
0
Select Network and then click OK.
A
Click Browse.
B
Select your model name, and then click OK.
Then click OK again to close the
DeviceSelector.
C
Select Applications from the Go menu.
D
Open the Utilities folder.
For Network Interface Cable Users (MFC-420CN, MFC-620CN only)
In case of using both USB and LAN cables,
route both cables through the trench.
Step 2

Brother MFC-210C Specifications

General

Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	15 ppm
Faxing	No
Modem speed	14.4 Kbit/s
Copy speed (black, normal quality, A4)	17 cpm
Copy speed (color, normal quality, A4)	11 cpm
Scan speed	4 sec/page
Dimensions (WxDxH)	373 x 453 x 135 mm
Color all-in-one functions	copy, print, scan
Grayscale levels	256
Optical scanning resolution	600 x 2400 DPI
Number of print cartridges	4
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Total input capacity	100 sheets
Total output capacity	25 sheets
Market positioning	Home & office