Brother MFC-260C - MFC-260 C Control Panel Overview

Chapter 1
4
MFC-260C Control panel overview 1
The MFC-235C and MFC-260C have the same control panel keys.
Note
Most of the illustrations in this User’s Guide show the MFC-260C.
1 Fax keys
 Redial/Pause
Redials the last number called. It also
inserts a pause when programming quick
dial numbers.
 Tel/R
This key is used to have a telephone
conversation after picking up the external
handset during the F/T pseudo-ring.
Also, use this key to gain access to an
outside line, or transfer a call to another
extension when it is connected to a PBX.
2 Dial Pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
The # key lets you temporarily switch the
dialling mode during a telephone call from
Pulse to Tone.
3 Mode keys:
 Fax
Lets you access Fax mode.
 Scan
Lets you access Scan mode.
 Copy
Lets you access Copy mode.
 PhotoCapture
Lets you access PhotoCapture Center™
mode.
4 Fax Resolution
Lets you temporarily change the resolution
when sending a fax.
5 Ink Management
Lets you clean the print head, check the print
quality, and check the available ink volume.
Downloaded from ManualsPrinter.com Manuals