188
Wireless one-push configuration D
If your wireless access point supports either SecureEasySetup™, Wi-Fi Protected Setup™
(PBC
1
) or AOSS™, you can configure the machine easily without a computer. By pushing a
button on the wireless LAN router / access point and the machine, you can set up the wireless
network and security settings. See the users guide for your wireless LAN router / access point for
instructions on how to access one-push mode.
1
Push Button Configuration
Note
Routers or access points that support SecureEasySetup™, Wi-Fi Protected Setup™ or
AOSS™ have the symbols shown below.
To Next Page
Loading...
