Control panel setup
41
5
4.Network
(HL-2280DW
and
DCP-7070DW)
6.Network
(MFC-7860DW)
(continued)
1.Wired LAN
(continued)
2.Ethernet — Auto*
100B-FD
100B-HD
10B-FD
10B-HD
3.Wired Status — Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
4.MAC Address ——
5.Set to Default
— Reset
Exit
6.Wired Enable — On*
Off
2.WLAN 1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or
DHCP, you will be asked to enter how
many times the machine tries to obtain
the IP address.)
2.IP Address
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet Mask
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
4.Gateway
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name BRWxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config Auto*
Static
Main menu Submenu Menu selections Options
To Next Page
Loading...
