Brother MFC-7360N - Status (for DCP-7065 DN, MFC-7360 N, MFC-7460 DN and MFC-7860 Dn);Wired Status (for HL-2280 DW, DCP-7070 DW and MFC-7860 DW); Setup Wizard (Wireless Network Only); WPS or AOSS (Wireless Network Only); WPS W;Pin Code (Wireless Network Only)

Control panel setup
28
5
Status (For DCP-7065DN, MFC-7360N, MFC-7460DN and MFC-7860DN)/Wired
Status (For HL-2280DW, DCP-7070DW and MFC-7860DW) 5
This field displays the current wired network status.
Setup Wizard (wireless network only) 5
The Setup Wizard guides you through the wireless network configuration. (For more information, see the
Quick Setup Guide or Using the Setup Wizard from the control panel on page 16.)
WPS or AOSS™ (wireless network only) 5
If your WLAN access point/router supports either Wi-Fi Protected Setup (PBC
1
) or AOSS™ (Automatic
Wireless mode), you can configure the machine easily without a computer. (For more information, see the
Quick Setup Guide or Using WPS or AOSS™ from the control panel menu to configure your machine for a
wireless network (Push Button Configuration) on page 16.)
1
Push Button Configuration
WPS w/PIN Code (wireless network only) 5
If your WLAN access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the
machine easily without a computer. (For more information, see Using the PIN Method of Wi-Fi Protected
Setup on page 20.)
WLAN Status (wireless network only) 5
Status 5
This field displays the current wireless network status.
Signal 5
This field displays the current wireless network signal strength.
SSID 5
This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID
name.
Comm.Mode 5
This field displays the current wireless network communication mode.