Brother MFC-7360N - Confirm Your Wireless Network Setup Method; Configuration Using the Machines Control Panel Setup Wizard to Configure Your Machine for a Wireless Network (Recommended); Configuration Using WPS or AOSS from the Control Panel Menu to Configure Your Machine for a Wireless Network (Push Button Configuration) (Infrastructure Mode Only)

Configuring your machine for a wireless network (For HL-2280DW, DCP-7070DW and MFC-7860DW)
12
3
Confirm your wireless network setup method 3
There are four methods to configure your wireless network machine. Use Setup Wizard from the control panel
(recommended), WPS/AOSS™ (Push Button Configuration) from the control panel menu, the Brother
installer application on the CD-ROM or the PIN Method of Wi-Fi Protected Setup. The setup process will be
different depending on your network environment.
Configuration using the machine’s control panel Setup Wizard to configure
your machine for a wireless network (Recommended) 3
You can use the machine’s control panel to configure your wireless network settings. By using the control
panel Setup Wizard function, you can easily connect your Brother machine to your wireless network. You
must know your wireless network settings before you proceed with this installation.
Configuration using WPS or AOSS™ from the control panel menu to configure
your machine for a wireless network (Push Button Configuration)
(Infrastructure mode only) 3
We recommend that you use WPS or AOSS™ from the control panel menu to configure your wireless
network settings if your WLAN access point/router (A) supports either Wi-Fi Protected Setup (PBC
1
) or
AOSS™.
1
Push Button Configuration
A