Configuring your machine for a wireless network (For HL-2280DW, DCP-7070DW and MFC-7860DW)
10
3
For Ad-hoc mode 3
a Confirm your network environment. See page 11.
b Confirm your wireless network setup method. See page 12.
c Configure your machine for a wireless network. See page 16.
Wireless configuration and installing the printer driver have been completed.
Ad-hoc mode
Connected to a wireless capable computer
without a WLAN access point/router
or
Infrastructure mode See page 9
Connected to a computer with a WLAN access
point/router
Using the Setup Wizard from the control panel
(Recommended)
Using the Brother installer
application
See page 16 See page 22
Installing drivers and software (See the Quick Setup Guide)
To Next Page
Loading...
