Brother MFC-7440N

Other manuals for Brother MFC-7440N

User Guide194 pages

Network User's Guide88 pages

User Manual32 pages

Quick Setup Guide32 pages

Specifications4 pages

Questions and Answers:

A
Aaron SteeleSep 1, 2025
What does ‘RESULT:ERROR’ mean on Brother MFC-7440N Transmission Verification Report and how to fix it?
- J
  Jimmy FranklinSep 1, 2025
  A ‘RESULT:ERROR’ message on the Transmission Verification Report indicates a problem during fax transmission. This is probably due to temporary noise or static on the line, so try sending the fax again. Also, your machine may be out of memory, to free up extra memory, you can turn off fax storage. Try changing the Compatibility setting to Basic(for VoIP).
A
Alexis Rodriguez DDSSep 13, 2025
Why does my Brother MFC-7440N All in One Printer Transmission Verification Report say ‘RESULT:ERROR’?
- L
  Lawrence GonzalesSep 13, 2025
  This error likely occurs due to temporary noise or static on the telephone line. Try sending the fax again. It could also mean that your machine is running out of memory. To free up extra memory, you can turn off fax storage, print fax messages in memory or cancel a delayed fax or polling job. Another reason is interference on the telephone line; in this case, try changing the Compatibility setting to Basic(for VoIP) (For MFC-7840W, Normal or Basic(for VoIP)).
L
Lindsay JonesAug 31, 2025
What to do if my Brother All in One Printer is printing pages that are smeared?
- A
  Abigail BuckAug 31, 2025
  The Paper Type setting may be incorrect for the type of print media you are using, or the print media may be too thick or have a rough surface.
J
James CarrSep 15, 2025
How to troubleshoot dialling issues on my Brother All in One Printer?
- C
  Christopher JuarezSep 16, 2025
  Check for a dial tone. Change the Tone/Pulse setting. Check all line cord connections. Check that the machine is plugged in and switched on. If an external phone is connected to the machine, send a manual fax by lifting the handset of the external telephone and dialling the number. Wait to hear fax receiving tones before pressing Start.
J
Janice ShawSep 15, 2025
Why does my Brother MFC-7440N All in One Printer print condensed text or have missing lines?
- M
  Miss Natasha ValdezSep 15, 2025
  This is usually caused by a poor telephone connection. Ask the other party to send the fax again.
A
andrew60Sep 23, 2025
Why don't headers or footers show up when printing from my Brother MFC-7440N?
- D
  Dillon CummingsSep 23, 2025
  There is an unprintable area on the top and bottom of the page. Adjust the top and bottom margins in your document to allow for this.
K
Katie PughAug 27, 2025
What to do if my computer cannot find my Brother MFC-7440N?
- R
  Richard SotoAug 27, 2025
  For Windows® users: The firewall setting on your PC may be rejecting the necessary network connection. For Macintosh® users: Re-select your machine in the Device Selector application.
H
hwolfAug 27, 2025
How to fix vertical black lines when receiving faxes on my Brother All in One Printer?
- R
  Ronald Vaughn Jr.Aug 27, 2025
  If you're seeing vertical black lines when receiving faxes, the corona wire for printing may be dirty, so clean the corona wire. The sender’s scanner may also be dirty, ask the sender to make a copy to see if the problem is with the sending machine. Try receiving from another fax machine.
C
Chelsea McmahonAug 26, 2025
How to remove vertical black line in copies from Brother MFC-7440N?
- L
  Laura GarciaAug 27, 2025
  Black vertical lines on copies are typically caused by dirt or correction fluid on the glass strip. Clean the scanner glass. The corona wire for printing may also be dirty, so clean the corona wire as well.
A
Amanda WagnerAug 25, 2025
Why Brother MFC-7440N All in One Printer does not load paper and shows 'No Paper' or 'Paper Jam'?
- M
  Melissa ByrdAug 26, 2025
  If your Brother All in One Printer displays 'No Paper' or a 'Paper Jam' message, here's what you can do: * If there is no paper, load a new stack of paper into the paper tray. * If there is paper in the paper tray, make sure it is straight. * If the paper is curled, you should straighten it; sometimes it is helpful to remove the paper, turn the stack over, and put it back into the paper tray. * Reduce the amount of paper in the paper tray, and then try again.

Brother MFC-7440N Specifications

General

Print technology	Laser
Time to first page (black, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	22 ppm
Internal memory	32 MB
Mac compatibility	Yes
Sound power level (standby)	32 dB
Sound pressure level (printing)	53 dB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	75 W
Power consumption (average operating)	10, 320 W
Standard interfaces	Ethernet
Faxing	Mono faxing
Fax memory	400 pages
Fax coding methods	MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	200
Maximum input capacity	250 sheets
Multi-Purpose tray input capacity	1 sheets
Auto document feeder (ADF) input capacity	35 sheets
Media weight (tray 1)	60 - 105 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Dimensions (WxDxH)	428 x 396 x 304 mm
Networking features	10/100BaseTX
All-in-one functions	Copy, Fax, Scan
Color all-in-one functions	scan, n
Compatible operating systems	Windows Vista, XP (32 & 64 bit); Windows 2000 Mac OS X 10.2.4 en recenter Linux printerdriver
Maximum copy resolution	600 x 600 DPI
Copy speed (black, normal quality, A4)	22 cpm
Display	LCD
Market positioning	Home & office
Bundled software	ScanSoft Paperport 11SE met OCR voor Windows Newsoft Presto! PageManager7 voor Macintosh
Package weight	14.900 g