6. Brother PC-FAX Software (Not available for DCP models)
109
Configuring the Network PC-FAX Receiving Settings 6
If you wish to change the network PC-FAX Receive settings that you specified during the original MFL-Pro
Suite (see the Quick Setup Guide), follow the steps below.
a In the PC-FAX RX Setup dialogue box, click the Network Settings button. The Network Settings
dialogue box appears.
b You must specify the IP address or name of your machine.
Specify your machine by address 6
1 Enter the IP address of the machine in IP Address.
Specify your machine by name
6
1 Enter the machine node name in Node Name, or click the Browse button and choose the correct
Brother machine you want to use from the list.
Specify your PC name 6
1 You can specify the PC name that will appear on the display of the machine. To change the name,
enter the new name in Display Your PC Name.
To Next Page
Loading...
